Brace Rods Manufacturer in India — Diagonal Tension for Lateral Load Bracing
Diagonal and X-brace tension rods that keep steel frames square against wind and lateral loads. M12–M48, lengths to 12 m, high-tensile and galvanised options. MTC certified.
Experience
Brace Rods Manufactured for Steel Frame Cross-Bracing
E S Haji & Co. is a leading manufacturer of Brace Rods in India, supplying diagonal tension rods that stabilise steel structures, bridges, buildings and pre-engineered buildings against wind and lateral loads since 1924. Our brace rods carry diagonal tension across bays, holding the frame square and rigid throughout its service life.
Each brace rod is produced to your bracing layout with the correct diameter, thread and length — in mild steel, galvanised, stainless or high-tensile grade. Available in single lengths up to 12 metres on request, with Mill Test Certificates and dependable PAN India delivery.
Brace Rods are threaded steel tension rods installed diagonally across a structural bay to resist wind, seismic and lateral loads. Working with connectors, turnbuckles and hillside washers, they form the X-bracing or cross-bracing that keeps a steel frame square and stable. Brace rods are essential in pre-engineered buildings, industrial sheds, towers and bridges, where they provide an efficient, lightweight load path for horizontal forces.
Size Range
M12 – M48
Grades
4.6 – 10.9
Standards
IS 2062 / A36 / A572 / IS 1367
Materials
MS · CS · SS304/316 · Galv · Alloy
Certification
Mill Test Certificates (MTC) with every batch
Key Benefits of Our Brace Rods
Every brace rods we manufacture is built to perform under demanding load and site conditions.
Lateral Stability
Resists wind, seismic and horizontal loads across the frame
Efficient Load Path
Lightweight tension members hold the structure square
Long Lengths
Single lengths up to 12 metres on request
High-Strength Options
Grade 8.8 / 10.9 and alloy steel for heavy bracing
Corrosion Resistance
Galvanised and stainless options for outdoor frames
Custom Manufacturing to Drawing
Diameter, length, thread and finish produced exactly to your engineering drawing.
Bulk Capacity, Reliable Lead Times
High-volume in-house production with dependable PAN India delivery schedules.
Certified Materials & MTCs
Premium-grade certified steel supplied with Mill Test Certificates on every batch.
Brace Rod Types We Manufacture
Diagonal Brace Rods
Cross / X-Brace Rods
Threaded Tension Rods
Stainless / High-Tensile Brace Rods
Sag Rods
Galvanised Brace Rods
Full Specifications of Our Brace Rods
| Specification | Range / Options |
|---|---|
| Types | Diagonal brace rods, cross / X-brace rods, threaded tension rods |
| Diameters | M12, M16, M20, M24, M30, M36, M42, M48 (and to drawing) |
| Diameter Range | 12 mm to 36 mm |
| Lengths | As per bay size (single lengths up to 12 metres on request) |
| Thread | Rolled or cut thread, single or both ends |
| Rod Type | Fully Threaded / Partially Threaded |
| End Connections | Threaded Ends with Nuts / Turnbuckle Compatible |
| Materials | Mild Steel, High Tensile Steel, Carbon Steel, SS304, SS316, Galvanised, High-Tensile Alloy Steel |
| Grades | 4.6, 5.6, 8.8, 10.9 |
| Standards | IS 2062, ASTM A36 / A572, IS 1367 / ISO 898-1 |
| Surface Finishes | Plain, Hot-Dip Galvanised, Zinc Plated, Painted, SS Mill |
| Applications | Steel Structures, Roof Bracing, Industrial Buildings |
| Delivery | PAN India + Export |
Material Grades We Supply
| Material | Description |
|---|---|
| Mild Steel | Cost-efficient, versatile for general-purpose structural use |
| Carbon Steel | Strong and dependable for industrial anchoring applications |
| SS304 | Austenitic stainless — corrosion resistance for general environments |
| SS316 | Marine-grade stainless — superior resistance to chlorides and chemicals |
| Galvanised | Hot-dip galvanised coating for rust-free outdoor service |
| High-Tensile Alloy Steel | Maximum load-bearing capacity for critical installations |
Standards & Grades
| Standard | Detail |
|---|---|
| IS 2062 | Indian Standard for hot-rolled structural steel |
| ASTM A36 / A572 | US structural carbon steel standard |
| IS 1367 / ISO 898-1 | Mechanical properties of threaded steel fasteners |
| Bolt Grades | 4.6, 5.6, 8.8, 10.9 — selected to load requirement |
Surface Finishes Available
How We Build Your Brace Rods
Engineering Review
We review your structural drawings, design loads and specifications before production begins.
Raw Material Sourcing
Certified mill steel is selected and verified with incoming inspection and testing.
Forging, CNC & Threading
Precision bending, forging, CNC machining and thread-rolling deliver dimensional accuracy.
QC & Dispatch
Dimensional inspection, finishing and MTC documentation before secure PAN India dispatch.
Industries We Serve
Brace Rods from E S Haji & Co are trusted across construction, energy and process industries throughout India.
Pre-Engineered Buildings
Roof and wall cross-bracing
Steel Construction
Lateral stability systems for frames
Bridges & Infrastructure
Tension bracing for large spans
Towers & Masts
Guying and bracing members
Industrial Sheds & Warehouses
Wind bracing bays
Oil & Gas Refineries
Anchoring and supports for pipelines, plants and offshore installations.
Power Generation
Fasteners for transformers, towers, switchyards and turbine bases.
Renewable Energy
Bases for wind turbines and solar mounting structures.
Railways & Metro
Structural bracing for railway sheds, metro stations and elevated corridors.
What Our Clients Say
We sourced X-brace rods from E S Haji & Co. for a large industrial shed project in Chennai. The threads were perfectly rolled, lengths matched our bracing layout exactly, and the frame stayed tight and true through installation. No rework, no delays — exactly what a structural contractor needs.
Senthil K. Structural Contractor, ChennaiOrdered high-tensile Grade 8.8 brace rods for a telecom tower project in Pune. E S Haji delivered on schedule with full MTCs, dimensional accuracy was spot on, and their team was responsive throughout. Will definitely be placing repeat orders for upcoming tower sites.
Rohit S. Project Engineer, PuneFor a warehouse project in Hyderabad, we needed single-length brace rods up to 11 metres to avoid field splicing. E S Haji manufactured them without issue and delivered on time. Saved us significant labour on site. Their capability for long custom lengths sets them apart from most suppliers.
Deepak R. Site Lead, HyderabadLocations We Serve
From our facility in Ambattur, Chennai — we supply to industrial hubs across India and ship internationally.
Chennai & Tamil Nadu
Ambattur · Guindy · Perungudi · Tambaram · Sriperumbudur
Manali · Madhavaram · Oragadam · Maraimalai Nagar · Padi · Avadi
Coimbatore · Trichy · Madurai · Salem · Hosur · Erode
PAN India
Mumbai · Bangalore · Hyderabad · Pune · Delhi NCR
Kolkata · Ahmedabad · Visakhapatnam · Vadodara · Surat
and all major industrial cities
International Export
UAE · Saudi Arabia · Qatar · Oman · Bahrain
Sri Lanka · Nepal · Bangladesh · Singapore
Malaysia · Africa · and more
Frequently Asked Questions
Common questions about our brace rods manufacturing and supply.
-
What are brace rods used for?
Brace rods are threaded steel tension rods installed diagonally across a bay to resist wind, seismic and lateral loads. They form the X-bracing or cross-bracing that keeps a steel frame square and stable.
-
What sizes and lengths of brace rods do you make?
We manufacture brace rods from M12 to M48 in lengths set by your bay size, with single lengths up to 12 metres available on request.
-
Do brace rods need connectors and turnbuckles?
Yes. Brace rods work with couplers, clevises, turnbuckles and hillside washers to terminate, tension and anchor the rods to the frame. We supply the complete bracing hardware set.
-
What is the difference between a brace rod and a sag rod?
Brace rods resist lateral and wind loads diagonally across a structural bay, while sag rods support purlins and girts against sagging between main frames. Both are tension rods but serve different structural functions — we manufacture and supply both.
-
Which materials and finishes are available?
Brace rods are available in mild steel, carbon steel, SS304, SS316, galvanised and high-tensile alloy steel, with plain, hot-dip galvanised, zinc-plated and painted finishes.
-
What standards do your brace rods meet?
Our brace rods are made from IS 2062 / ASTM A36 / A572 structural steel with threads to IS 1367 / ISO 898-1, in grades 4.6, 5.6, 8.8 and 10.9.
-
Do you supply brace rods PAN India?
Yes. We supply brace rods - with connectors, hillside washers and sag rods - across all major Indian cities with reliable lead times and MTCs.
-
Can brace rods be custom manufactured to drawing?
Yes. We manufacture brace rods fully to your structural drawings — diameter, length, thread type, end connections and surface finish are all produced to your exact specification. Share your drawing or bracing layout and we will confirm production feasibility and lead time.
Explore Our Products
Foundation & anchor bolts, bracing systems, fasteners and fabrication — tap any product to view full details.
Get in touch
You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.
Call us on
(+91) 994 009 7572 / 89563 56925
Email us
info@eshaji.in
