Welcome to our E S HAJI & CO!
Call us 9:00am - 6:00pm
(+91) 994 009 7572 / 89563 56925
Monday to Friday
9:00am - 6:00pm
E-mail us
info@eshaji.in
Hillside Washer
Manufacturer
in India
Precision beveled washers with elongated slots that square the nut to a sloped rod or bolt. Essential for sag-rod and brace connections. Made to your angle, MS, SS and galvanised.
Experience
Trusted Hillside Washers Manufacturer & Supplier in India
E S Haji & Co. is a trusted manufacturer of Hillside Washers in India, supplying precision beveled washers that let rods and bolts pass through steel at an angle while keeping the nut bearing square. Used extensively with sag rods, brace rods and diagonal bracing, our hillside washers correct angular misalignment and ensure full, even contact under the nut.
Each washer is produced with the correct slot, bevel angle and bearing area for your connection, in mild steel, stainless or galvanised finish. Manufactured to drawing with Mill Test Certificates and dependable PAN India delivery.
A hillside washer is a beveled or sloped washer with an elongated slot that allows a rod or bolt to pass through a structural member at an angle - for example where a diagonal brace or sag rod meets a flat purlin, beam or gusset. The angled top face keeps the nut and the bearing surface square to the rod, distributing load evenly and preventing the nut from cocking. They are a key accessory in roof and wall bracing systems for pre-engineered and industrial buildings.
Size Range
M12 – M48
Bevel Angle
To Drawing
Standards
IS 2062 / IS 5370 / IS 6610 / ASTM F436
Materials
MS · CS · SS304/316 · Galv · Malleable
Certification
Mill Test Certificates (MTC) with every batch
Key Benefits of Our Hillside Washers
Every hillside washers we manufacture is built to perform under demanding load and site conditions.
Corrects Angular Misalignment
Keeps the nut square to a sloped rod or bolt
Even Load Distribution
Full bearing prevents nut cocking and thread damage
Custom Bevel Angles
Manufactured to match your brace or sag-rod slope
Corrosion Resistance
Galvanised and stainless options for outdoor sites
Reliable Bracing
Essential accessory for roof and wall bracing systems
Custom Manufacturing to Drawing
Diameter, length, thread and finish produced exactly to your engineering drawing.
Bulk Capacity, Reliable Lead Times
High-volume in-house production with dependable PAN India delivery schedules.
Certified Materials & MTCs
Premium-grade certified steel supplied with Mill Test Certificates on every batch.
Hillside Washer Types We Manufacture
Beveled (Sloped) Washers
Square Hillside Washers
Round Hillside Washers
Stainless / Galvanised Washers
Malleable Iron Hillside Washers
Heavy-Duty Hillside Washers
Full Specifications of Our Hillside Washers
| Parameter | Details |
|---|---|
| Material | Mild Steel / High Tensile Steel / Alloy Steel |
| Size Range | M10 to M36 Bolt Compatibility |
| Thickness | 5 mm to 25 mm |
| Angle Type | Bevelled / Tapered / Custom Angle |
| Hole Diameter | As per Bolt Size Requirement |
| Surface Finish | Hot Dip Galvanized / Zinc Plated / Plain Finish |
| Standards | IS / DIN / ASTM Standards |
| Applications | Steel Structures, Channels, Beams, Industrial Assemblies |
Material Grades We Supply
| Material | Description |
|---|---|
| Mild Steel | Cost-efficient, versatile for general-purpose structural use |
| Carbon Steel | Strong and dependable for industrial anchoring applications |
| SS304 | Austenitic stainless — corrosion resistance for general environments |
| SS316 | Marine-grade stainless — superior resistance to chlorides and chemicals |
| Galvanised | Hot-dip galvanised coating for rust-free outdoor service |
| Malleable Iron | Tough cast material for formed washer bodies |
Standards & Grades
| Standard | Detail |
|---|---|
| IS 2062 | Indian Standard for hot-rolled structural steel |
| IS 5370 / IS 6610 | Taper / square washers for structural use |
| ASTM F436 (where specified) | Hardened steel washers |
Surface Finishes Available
How We Build Your Hillside Washers
Engineering Review
We review your structural drawings, design loads and specifications before production begins.
Raw Material Sourcing
Certified mill steel is selected and verified with incoming inspection and testing.
Forging, CNC & Threading
Precision bending, forging, CNC machining and thread-rolling deliver dimensional accuracy.
QC & Dispatch
Dimensional inspection, finishing and MTC documentation before secure PAN India dispatch.
Industries We Serve
Hillside Washers from E S Haji & Co are trusted across construction, energy and process industries throughout India.
Pre-Engineered Buildings
Roof and wall bracing connections
Sag & Brace Rod Systems
Angled rod terminations at purlins and girts
Steel Construction
Diagonal bracing and gusset connections
Industrial Sheds & Warehouses
Cross-bracing systems
Towers & Frames
Angled member connections
Oil & Gas Refineries
Anchoring and supports for pipelines, plants and offshore installations.
Power Generation
Fasteners for transformers, towers, switchyards and turbine bases.
Renewable Energy
Bases for wind turbines and solar mounting structures.
Ports & Marine Structures
Corrosion-resistant bracing for coastal and marine installations.
What Our Clients Say
We needed hillside washers cut to a specific brace angle for a warehouse project, and the fit was spot on. The nuts now seat square on every diagonal, no more cocking or thread damage like we faced with our old supplier.
Mani S. Structural Contractor, ChennaiOur roof bracing system had an unusual slope, so standard washers wouldn't work. E S Haji manufactured beveled washers to our exact angle and delivered within days. Saved us a lot of site rework.
Gokul R. Site Engineer, CoimbatoreSourcing sag rods, brace rods and matching galvanised hillside washers from one supplier made procurement a lot simpler for our project. Quality and documentation were consistent across the entire batch.
Irfan A. Procurement, BangaloreLocations We Serve
From our facility in Ambattur, Chennai — we supply to industrial hubs across India and ship internationally.
Chennai & Tamil Nadu
Ambattur · Guindy · Perungudi · Tambaram · Sriperumbudur
Manali · Madhavaram · Oragadam · Maraimalai Nagar · Padi · Avadi
Coimbatore · Trichy · Madurai · Salem · Hosur · Erode
PAN India
Mumbai · Bangalore · Hyderabad · Pune · Delhi NCR
Kolkata · Ahmedabad · Visakhapatnam · Vadodara · Surat
and all major industrial cities
International Export
UAE · Saudi Arabia · Qatar · Oman · Bahrain
Sri Lanka · Nepal · Bangladesh · Singapore
Malaysia · Africa · and more
Frequently Asked Questions
Common questions about our hillside washers manufacturing and supply.
-
What is a hillside washer used for?
A hillside washer is a beveled washer with an elongated slot that lets a rod or bolt pass through a flat member at an angle while keeping the nut square to the rod. It is used at diagonal brace and sag-rod connections to distribute load evenly.
-
Why is the washer beveled?
The angled (beveled) face compensates for the slope of a diagonal rod meeting a flat purlin, beam or gusset. Without it, the nut would bear unevenly and could cock, damaging threads and reducing the joint's capacity.
-
What sizes and angles do you manufacture?
We make hillside washers for rods from M12 to M48, with the bevel angle and slot produced to match your brace or sag-rod slope per drawing.
-
What is the difference between a hillside washer and a regular washer?
A regular flat washer has parallel faces and works only on a perpendicular bolt connection. A hillside washer has one beveled face and an elongated slot, letting it seat flat against an angled or sloped member while keeping the nut square to the rod.
-
Which materials and finishes are available?
Hillside washers are available in mild steel, carbon steel, SS304, SS316, galvanised and malleable iron, with plain, hot-dip galvanised, zinc-plated and painted finishes.
-
Do hillside washers come with test certificates?
Yes. Every batch is supplied with Mill Test Certificates (MTCs) confirming material and mechanical properties.
-
Can you supply hillside washers PAN India?
Yes. We supply hillside washers - alongside sag rods, brace rods and connectors - across all major Indian cities with reliable lead times.
-
Is there a minimum order quantity for hillside washers?
No fixed minimum. We supply small batches for site replacements as well as bulk quantities for full bracing projects, with the same quality and documentation standards.
Explore Our Products
Foundation & anchor bolts, bracing systems, fasteners and fabrication — tap any product to view full details.
Get in touch
You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.
Call us on
(+91) 994 009 7572 / 89563 56925
Email us
info@eshaji.in
