Plate Type Foundation Bolts Manufacturer in India — Welded Plate for Maximum Tension Resistance
Welded-plate anchor bolts delivering very high pull-out and tension capacity for tall structures, wind turbines and seismic foundations. Square, round or rectangular plates to drawing.
Experience
Plate Type Foundation Bolts Manufactured for Wind Turbines & High-Vibration Foundations
E S Haji & Co. is a leading manufacturer of Plate Type Foundation Bolts in India , supplying high pull-out anchoring solutions for heavy structures and machinery since 1924. A steel plate welded to the embedded end creates a large bearing surface inside the concrete, delivering exceptional resistance against tension and uplift.
Each plate-type bolt is produced to your specification, with plate size, thickness, thread length and embedment matched to the design load. Available M12 to M100 in MS, carbon steel, stainless and high-tensile grades, with Mill Test Certificates and dependable PAN India dispatch.
At E S Haji & Co, every plate type foundation bolt undergoes strict dimensional checks and weld quality inspection before dispatch. Our in-house manufacturing facility in Chennai allows full control over material selection, plate welding and thread accuracy ensuring each bolt performs exactly as your structural design demands.
Size Range
M12 – M100
Grades
4.6 – 12.9
Standards
ASTM F1554 / IS 5624 / DIN / ISO
Materials
MS · CS · SS · EN8D/19 · Galv · Alloy
Certification
Mill Test Certificates (MTC) with every batch
Key Benefits of Our Plate Type Foundation Bolts
Every plate type foundation bolts we manufacture is built to perform under demanding load and site conditions.
Very High Pull-Out Capacity
The welded plate spreads load over a large bearing area
Ideal for Uplift Loads
Suited to tall structures, turbines and seismic design
Reduced Concrete Stress
Wider bearing lowers local concrete pressure
Custom Plate Geometry
Plate size, shape and thickness to your drawing
Corrosion Resistance
Galvanised and stainless options for harsh sites
Custom Manufacturing to Drawing
Diameter, length, thread and finish produced exactly to your engineering drawing.
Bulk Capacity, Reliable Lead Times
High-volume in-house production with dependable PAN India delivery schedules.
Certified Materials & MTCs
Premium-grade certified steel supplied with Mill Test Certificates on every batch.
Plate Type Foundation Bolt Configurations We Manufacture
Square Plate Bolt
Round Plate Bolt
Double-Nut Plate Bolt
Stainless / Galvanised Plate Bolt
Rectangular Plate Bolt
High-Tensile Headed Anchor Plate Bolt
Full Specifications of Our Plate Type Foundation Bolts
| Specification | Range / Options |
|---|---|
| Material | Mild Steel / High Tensile Steel / Alloy Steel |
| Diameter Range | M20 to M80 |
| Bolt Length | 300 mm to 4000 mm (Custom) |
| Plate Thickness | 6 mm to 25 mm |
| Plate Shape | Square / Rectangular / Circular |
| Thread Length | As Per Requirement |
| Embedment Depth | As Per Structural Design |
| Welding Type | Full Penetration / Fillet Weld |
| Surface Finish | Hot Dip Galvanized / Zinc Plated / Bitumen Coated |
| Grade | 4.6 / 5.6 / 8.8 |
| Standards | IS / DIN / ASTM |
Material Grades We Supply
| Material | Description |
|---|---|
| MS | Cost-efficient, versatile mild steel for general structural use |
| Carbon Steel | Strong and dependable for industrial anchoring applications |
| SS304 | Austenitic stainless — corrosion resistance for general environments |
| SS316 | Marine-grade stainless — superior resistance to chlorides and chemicals |
| EN8D | Medium-carbon steel for higher-strength structural requirements |
| EN19 | Alloy steel engineered for high-tensile, high-temperature service |
| Galvanised | Hot-dip galvanised coating for rust-free outdoor service |
| High-Tensile Alloy Steel | Maximum load-bearing capacity for critical installations |
Standards & Grades
| Standard | Detail |
|---|---|
| ASTM F1554 (Gr 36/55/105) | US standard for structural anchor bolts (Grade 36, 55, 105) |
| IS 5624 | Indian Standard for foundation and anchor bolts |
| DIN 529 | German Standard for masonry and foundation bolts |
| ISO 898-1 | Global tensile-strength standard for steel fasteners |
| Bolt Grades | 4.6, 5.6, 8.8, 10.9, 12.9 — selected to load requirement |
Surface Finishes Available
How We Build Your Plate Type Foundation Bolts
Engineering Review
We review your structural drawings, design loads and specifications before production begins.
Raw Material Sourcing
Certified mill steel is selected and verified with incoming inspection and testing.
Forging, CNC & Threading
Precision bending, forging, CNC machining and thread-rolling deliver dimensional accuracy.
QC & Dispatch
Dimensional inspection, finishing and MTC documentation before secure PAN India dispatch.
Industries We Serve
Plate Type Foundation Bolts from E S Haji & Co are trusted across construction, energy and process industries throughout India.
Wind & Renewable Energy
Turbine bases and solar tracker foundations
Heavy Machinery
Presses, mills and high-vibration equipment
Tall Structures
Stacks, towers, silos and chimneys
Power Plants
Turbine and transformer foundations
Seismic-Resistant Structures
High-uplift base connections
Oil & Gas Refineries
Anchoring and supports for pipelines, plants and offshore installations.
What Our Clients Say
We sourced square-plate anchor bolts from E S Haji & Co for a wind turbine foundation in Maharashtra. Weld quality and bearing area were exactly as specified — bolts handled severe uplift loads without any issue. Their team flagged a drawing discrepancy early during engineering review, saving us a costly site rework. MTCs were provided on time and we will be placing repeat orders for upcoming phases.
Gopal K. Civil Lead, Renewable EPC, PuneE S Haji & Co manufactured double-nut plate bolts to our drawing for a high-vibration press foundation. After months in service, bolts remain tight with zero loosening. Dimensional accuracy and surface finish were consistent across the full batch. Their lead time was better than every other supplier we had approached for the same requirement.
Ravi S. Project Engineer, AhmedabadFor a chimney stack foundation in Chennai, we needed heavy plate-type bolts with full weld inspection documentation. E S Haji & Co delivered exactly to drawing with MTCs and weld reports — structural team had zero punch points on the anchor bolt supply. Their in-house manufacturing gave us full confidence in quality control throughout the project.
Selvam P. Structural Consultant, ChennaiLocations We Serve
From our facility in Ambattur, Chennai — we supply to industrial hubs across India and ship internationally.
Chennai & Tamil Nadu
Ambattur · Guindy · Perungudi · Tambaram · Sriperumbudur
Manali · Madhavaram · Oragadam · Maraimalai Nagar · Padi · Avadi
Coimbatore · Trichy · Madurai · Salem · Hosur · Erode
PAN India
Mumbai · Bangalore · Hyderabad · Pune · Delhi NCR
Kolkata · Ahmedabad · Visakhapatnam · Vadodara · Surat
and all major industrial cities
International Export
UAE · Saudi Arabia · Qatar · Oman · Bahrain
Sri Lanka · Nepal · Bangladesh · Singapore
Malaysia · Africa · and more
Frequently Asked Questions
Common questions about our plate type foundation bolts manufacturing and supply.
-
What is a plate type foundation bolt?
A plate type foundation bolt is an anchor bolt with a steel plate welded to the embedded end. The plate creates a large bearing surface in the concrete, giving very high pull-out and tension capacity - much greater than a bent bolt of the same diameter.
-
When should I use plate type bolts?
Use plate type foundation bolts where uplift and tension loads are severe - tall structures, wind turbines, heavy or vibrating machinery, stacks and seismic foundations. The welded plate distributes load and reduces local concrete stress.
-
What plate shapes and thicknesses do you offer?
We supply square, round and rectangular end plates, typically 8 mm to 40 mm thick, sized to your design load. Plate geometry, thread length and embedment are produced to drawing.
-
What welding process is used for the plate?
We use full penetration or fillet welding depending on the design load and plate thickness. All welds are inspected for integrity before dispatch, and weld inspection reports can be provided on request.
-
What sizes and grades are available?
Plate type foundation bolts are manufactured from M12 to M100 in grades 4.6, 5.6, 8.8, 10.9 and 12.9, conforming to ASTM F1554, IS 5624, DIN 529 and ISO 898-1.
-
Do you provide MTCs with plate type bolts?
Yes. Every batch is supplied with Mill Test Certificates (MTCs) confirming material grade, chemistry and mechanical properties, with weld inspection on request.
-
Can you supply plate type bolts PAN India?
Yes. We deliver across Mumbai, Bangalore, Hyderabad, Pune, Delhi NCR, Kolkata, Ahmedabad and all major industrial hubs, with custom manufacturing to drawing.
-
Can plate type foundation bolts be hot-dip galvanised?
Yes. Hot-dip galvanising is available and recommended for outdoor, coastal and high-chloride environments. Zinc plating and black oxide finishes are also offered depending on project requirements.
Explore Our Products
Foundation & anchor bolts, bracing systems, fasteners and fabrication — tap any product to view full details.
Get in touch
You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.
Call us on
(+91) 994 009 7572 / 89563 56925
Email us
info@eshaji.in
